Different from all the other 8.8 kits out there, this kit will allow you to fit the three common Ford 8.8″ differential cases. You can run the Explorer (2007-2010), the Thunderbird (1989-1995) or the Cobra/MK8 aluminum case with this kit.
Also, different from all other kits, I designed this kit to brace off the upper tubing of the S2K rear subframe rather than using the normal front mounting locations. The oem front locations are a point of weakness and allow flex/twist since they sit out in front of the actual front of the diff. The front mount designed will not allow any flex or distortion under load. I am confident that this is the best and strongest design out there, but also I designed it to be VERY SIMPLE in construction which makes it more affordable as well!
This kit is a BOLT-IN setup, no welding or any fabrication needed!
The Ford 8.8 is widely used and regarded as a great bang for your buck rear end. It has many many gear options available, which makes it not only very affordable, but also very flexible!
This ford 8.8 kit will work with a 2007-2010 Ford Explorer 8.8 IRS case or 1989-1995 Ford thunderbird 8.8″ (IRON CASE) or aluminum Cobra case. However, the Cobra case is not recommended, as this is the weakest case. I recommend the Iron case for super high horsepower applications (1000+HP). You will need to purchase a OEM explorer rear cover if you go with the Tbird case, as the OEM T-bird case is a different style.
This kit will allow you to bolt in this strong, smooth operating, affordable rear end kit into your Honda S2000. The kit is 100% bolt in, and used your factory rear subframe mounting holes. The rear cage and front mount also come with a lifetime warranty! I am confident they will hold whatever you throw at them!
There are two options for axles. All axles INCLUDE the billet inner 8.8 stubs that install into the differential.
Level 5 Axles:
The first option are the Driveshaft Shop Level 5 axles, which have a bolt-in billet outer stub that will bolt-in to your factory wheel hubs. These are good for around 500hp.
PRO Axles:
The heavy hitter option is the Driveshaft Shop Pro-Level 1000HP axles, which include a heavier bar and also upgraded outer wheel hubs. The hub is a weak link for cars over 500HP so if your making power you need these.
The Grannas Racing 8.8 Kit Includes:
- Biller rear mount (uses factory bushing hardware – see part numbers below)
- Fabricated front crossmember mount
- All hardware required for installation
- Customer will need to find 2007-2010 Ford Explorer diff at local junkyard, usually these go for $130-250. OR I can secure a pumpkin and build a diff to suit your needs.
Axles are normally in stock. Aluminum or Carbon Fiber driveshafts can be made for any transmission combination. Just let me know what transmission combo you are running in the order notes!
You can have a local shop mustang/domestic shop build your junkyard 8.8, or you can have me build you one to your specs. In the dropdown options, you can select a GR built rear which includes an Truetrac LSD, and gear ratio of your choice, and all new bearings and seals, it also includes me sourcing the core pumpkin/case. For T56 Magnum / GR series transmissions I recommend 4.10 to 4.30 gearing. Core costs are higher on the TBIRD differentials as they are becoming very scarce.
RECOMMENDATIONS:
- If you are using an explorer differential in your build, then you are good to go. If you are planning on using a tbird or cobra rear, then you will need to source a factory rear cover from an explorer differential. If you cannot find one, i normally have them here and can provide one for $50.
- You will need the factory rear differential mounting bolts with washers and nuts. See Honda part numbers below.
- You will need to trim the top “nubs” on the explorer case (see picture)
If you do not have the factory rear bushing hardware here is part numbers. You will need two of each:
- bolts 90133-S2A-000
- washers 90504-SR3-010
- nuts 90372-SR3-003
| Axles | Level 5, Pro |
|---|---|
| Driveshaft | None, Aluminum (+$700), Carbon Fiber (+$1300) |
| Rear Diff | Build it myself (explorer), Build it myself (Tbird/Cobra) |
Speedy Shipping and Professional Packaging
We are able offer many shipping options thanks to our long-term relationship with UPS FedEx DHL. Our warehouse staff are highly educated and will package the items according to our precise and exact specifications. Your products will be subjected to an exhaustive examination before they will be properly packaged prior to being delivered. We ship to thousands of customers every day from all over the world. The fact that we're committed to becoming the biggest online retailer in the World is obvious. We have distribution centers as well as warehouses located in Europe and in the USA.
Orders that contain more than 1 item are assigned processing periods according to each item.
Prior to shipment, all purchased items will be thoroughly inspected. The majority of orders are shipped within 48 hours. The delivery time is estimated to be between 3 and seven days.
Returns
Due to the multiple parties involved, including the factory and the warehouse, we cannot effectively manage inventory. The stock levels may fluctuate at any given time. It's possible that your order will become unfulfilled when you have placed the order.
Our policy is valid for 30 days. If you have passed 30 days in the past since you purchased and we are unable to offer you a refund or exchange.
Your item should be in the original packaging and not be used. The item must be in the original packaging.
Related products
Differential
Toyota OEM 220mm “BIG 6-SPEED” rear end / LSD / differential rebuild kit Grannas Racing
Differential
Differential
PRO LEVEL AXLES – Driveshaft Shop Ford 8.8″ Rear End Swap FC3S Mazda RX7 Grannas Racing
